and who as pulls the layer on the barrel? in terms of speed play?
insider
September 18, 2015 AT 8:05 pm
I pull the resonator tightly, but the shock one is weak
pavel_drumsss
September 18, 2015 AT 8:06 pm
for high-speed play? legs do not get stuck in sweat? percussion I tighten strongly, for better rebound
insider
September 18, 2015 AT 8:06 pm
Maybe this is for those who play 250+?
kreker
September 18, 2015 AT 8:06 pm
shock is weak, because rebound interferes, for this there is a strong spring tension
kirill_an
September 18, 2015 AT 8:06 pm
The speed is in the legs, not in the plastic, it seems.
solidator
September 18, 2015 AT 8:07 pm
yes, that's understandable, but setting it by a certain method affects what you're playing !!!!!!!
with a strong impact tension, apparently the distance between the beater and the layer should be minimal?
pavel_drumsss
September 18, 2015 AT 8:07 pm
it is not necessary, the angle of the beater should be chosen based on the sensations of the legs. if the springs are tensioned strongly, at a large angle the beater will have to be pushed by the weight, if too small there will be no necessary swinging. I have about 30 degrees from the plastic, I'm so fine)
5seven
September 18, 2015 AT 8:08 pm
180 in the summer in an absolutely deflated layer) and for my taste, personally, the sound is cooler when the plastic is deflated)
for me this is already the speed of norms so ahhaha)
insider
I pull the resonator tightly, but the shock one is weak
pavel_drumsss
for high-speed play? legs do not get stuck in sweat? percussion I tighten strongly, for better rebound
insider
Maybe this is for those who play 250+?
kreker
shock is weak, because rebound interferes, for this there is a strong spring tension
kirill_an
The speed is in the legs, not in the plastic, it seems.
solidator
yes, that's understandable, but setting it by a certain method affects what you're playing !!!!!!!
with a strong impact tension, apparently the distance between the beater and the layer should be minimal?
pavel_drumsss
it is not necessary, the angle of the beater should be chosen based on the sensations of the legs. if the springs are tensioned strongly, at a large angle the beater will have to be pushed by the weight, if too small there will be no necessary swinging. I have about 30 degrees from the plastic, I'm so fine)
5seven
180 in the summer in an absolutely deflated layer) and for my taste, personally, the sound is cooler when the plastic is deflated)
for me this is already the speed of norms so ahhaha)