amdm
Having read on the Internet how to take care of the pedal, I realized that there are a million methods, someone says vd40 someone silicone grease, and so on. But what is the most correct and accurate method? The old pedal was lubricated with vd40 and it was all covered in dust and dirty
insider
vd is not grease)
alex_marchenko
Not all lubricants are compatible. You can harm
amdm
Well, I haven't lubricated the cobra with anything yet, and I'm trying to find what I need
alex_marchenko
Tama had its own lubricant. I don’t think she’s any unique and cannot be replaced.
5seven
I use ordinary machine oil
amdm
and how to lubricate it at all? Why not smear too much?
swerus
well, everything that rubs and spins
amdm
Well, I heard that if you lubricate the calm vest of a part of the pocket, then the ardor will be in oil and this is not very good
aroma
As far as I know, it is better not to lubricate anything with a VD. I lubricate myself with ordinary bicycle chain lubricant, everything is fine. One zilch and 2-3 months rest
andreevmaxik
On my gimbal, I only lubricate the attachment points of the foodboard with the heel and the crosspiece on the shaft with ordinary household lubricating oil. And I do not touch the bearings, because there are prom bearings which, in my case, are not collapsible. But if it is possible to disassemble, then a grease such as grease or lithol-24 will come off.
shalom
I don’t know, MB is not a topic, but if I understand correctly what needs to be missed (not bearings), then I use oil from a chainsaw. It is very convenient, you do not need much, and it is enough for a long time. Designed for high revs. Plus, fine dust is not badly knocked out of any difficult connections.
Maxofff
VD is not a lubricant, it is a cleaning agent for corrosion and other rubbish (it corrodes, does not lubricate in any way), I would not recommend them to either "lubricate". Lito-solidol - performs several other functions, and then clogs and the whole sticks to it dirt that is difficult to clean. For this there is elementary machine oil, a couple of drops are enough, there is no point in "pouring", or oil for sewing machines
kirill_an
Have Tama Tune-Up Oil TOL2