Such is the trouble happened with paiste5 rock crash 18. How would you advise to cut? A balgarka option to cut an even circle? Or...? Thank you for your attention !!!
solidator
June 21, 2015 AT 1:51 pm
Did it not immediately crack like that?
swerus
June 21, 2015 AT 1:56 pm
no, at first the little one went, and now I've brought it to this state ((
solidator
June 21, 2015 AT 1:56 pm
in vain brought. I think it's better to cut with an arc, although there probably isn't much sense anymore, since the crack is large and wide. Most likely the only option is to make the plate effect on "14, probably judging by the crack.
Maxofff
June 21, 2015 AT 1:57 pm
I once had a Crash Ride 20 Sabian AA cracked at the very base of the base ..... I had to make white from it ... which also did not live long ..... loss of losses = (
swerus
June 21, 2015 AT 1:57 pm
Yeah. You have an even more serious loss (Well, let's try this evening to experiment. And what is better to cut?
Maxofff
June 21, 2015 AT 1:57 pm
I xs even .. it will be rough =) I somehow practiced this & # 128515; I have a crack in the rehearsal set Sabian B8 pro ...... I did not hesitate to cut the line obliquely ... I have been rehearsing on it for 3 years now and like new: D along the radius .... I think you can do everything more accurately with a hacksaw!
insider
June 21, 2015 AT 1:57 pm
Make a splash. It is unlikely that you will be satisfied with the sound with such a large clipping. The probability that you will like the sound of the splash is 50%, but at least you can sell it later
1sthast
June 21, 2015 AT 1:58 pm
I cut the paste with a grinder, then I processed the section around, and then manually with fine sandpaper ... all the rules and the iron does not burn ... the current does not cut constantly .. let's cool down the metal a little, otherwise it will burn.
pavel_drumsss
June 21, 2015 AT 1:58 pm
the next time you see a small crack, immediately remove and set it aside, then you can still do something with it ...)
amdm
June 21, 2015 AT 1:58 pm
oh yes, throw it on the asphalt one more time in front of the trash heap. and say to yourself, well, finally I got rid of this shit!
kirill_an
June 21, 2015 AT 1:59 pm
Bell washed down, and give the rest to your father for spinners
aroma
June 21, 2015 AT 1:59 pm
make a stack. ! Throw something else on top and the effect will be cool
swerus
June 21, 2015 AT 2:00 pm
Done, and almost no sound is lost. Only now outweighs))
sega
June 21, 2015 AT 2:00 pm
this is hell
swerus
June 21, 2015 AT 2:00 pm
Sergey, it will do for rap)
Ivan_drums
June 21, 2015 AT 2:01 pm
I cut it through the ass, there should be an idial circle. In the neckline, closer to the inscription, there are some jambs, they may crack again there. Slip off the neckline.
swerus
June 21, 2015 AT 2:01 pm
already slapped everything. All the rules)) thanks)
solidator
Did it not immediately crack like that?
swerus
no, at first the little one went, and now I've brought it to this state ((
solidator
in vain brought. I think it's better to cut with an arc, although there probably isn't much sense anymore, since the crack is large and wide. Most likely the only option is to make the plate effect on "14, probably judging by the crack.
Maxofff
I once had a Crash Ride 20 Sabian AA cracked at the very base of the base ..... I had to make white from it ... which also did not live long ..... loss of losses = (
swerus
Yeah. You have an even more serious loss (Well, let's try this evening to experiment. And what is better to cut?
Maxofff
I xs even .. it will be rough =) I somehow practiced this & # 128515; I have a crack in the rehearsal set Sabian B8 pro ...... I did not hesitate to cut the line obliquely ... I have been rehearsing on it for 3 years now and like new: D along the radius .... I think you can do everything more accurately with a hacksaw!
insider
Make a splash. It is unlikely that you will be satisfied with the sound with such a large clipping. The probability that you will like the sound of the splash is 50%, but at least you can sell it later
1sthast
I cut the paste with a grinder, then I processed the section around, and then manually with fine sandpaper ... all the rules and the iron does not burn ... the current does not cut constantly .. let's cool down the metal a little, otherwise it will burn.
pavel_drumsss
the next time you see a small crack, immediately remove and set it aside, then you can still do something with it ...)
amdm
oh yes, throw it on the asphalt one more time in front of the trash heap. and say to yourself, well, finally I got rid of this shit!
kirill_an
Bell washed down, and give the rest to your father for spinners
aroma
make a stack. ! Throw something else on top and the effect will be cool
swerus
Done, and almost no sound is lost. Only now outweighs))
sega
this is hell
swerus
Sergey, it will do for rap)
Ivan_drums
I cut it through the ass, there should be an idial circle. In the neckline, closer to the inscription, there are some jambs, they may crack again there. Slip off the neckline.
swerus
already slapped everything. All the rules)) thanks)